Automatic abrasive cutting machine:
The punching member is a punching head that can move left and right along the beam, and the die can be fixed on the punching head or placed on the work piece. A large, computer-controlled gantry cutting machine punch is equipped with a rota-table die holder. The corresponding tool can be selected according to the program layout; of course, an automatic feeding mechanism is required.
Things to note when operating:
1" When setting the cutter, be sure to loosen the setting hand-wheel so that the setting lever touches the cutting point control switch. Otherwise, the setting action cannot be generated when the cutter setting switch is turned ON.
2" When working, the cutting knife should be placed in the center position of the upper pressing plate as much as possible to avoid the unilateral wear of the machine and affect its life.
3" Replace the new cutter. If the height is not the same, please reset it according to the setting method.
4" When cutting the movement, please leave the cutting knife or the seesaw. It is strictly forbidden to use the hand to help the knife to cut, so as to avoid danger.
5) If the operator needs to leave the position temporarily, please turn off the motor switch to avoid damage to the machine by improper operation.
6" Please avoid overloading to avoid damage to the machine and reduce the service life.