How to solve the oil leakage of hydraulic cutting machine

- Mar 25, 2019-

How to solve the oil leakage of the cutting machine:


First, to determine the structure of the machine, the general hydraulic cutting machine is divided into a rocker arm cutting machine, a four-column cutting machine, a flat cutting machine, a gantry type cutting machine. Different types of cutting machines have different oil leakage factors.


Second, when the cutting machine leaks oil, it is recommended to contact the manufacturer, let the manufacturer analyze the cause, and carry out maintenance under the guidance of the manufacturer, do not operate without authorization. The Thanco cutting machine is a lifetime maintenance, so any after-sales problem can be consulted free of charge.


Third, take the machine picture, machine nameplate (the machine picture is convenient for the manufacturer to know that the machine is the kind of structure, the machine nameplate is for the convenience of the manufacturer to identify the machine serial number, model, year, date of manufacture, etc.)


Fourth, today I share with you the biggest factor of oil leakage at the bottom of the rocker cutting machine. If the machine has been used for more than ten years, the bottom of the rocker cutting machine leaks oil. The first check point is whether the bottom seal is aging or the glue is falling off. Maintenance method: 1. Pump out the hydraulic oil inside the machine; 2. Lift the machine up by driving or forklift; 3. Open the cylinder head under the machine; 4. Replace the new gasket; 5. Use glass glue to The cylinder head is sealed, blown dry and can be.


Summary: The cutting machine has oil leakage, it is recommended to contact the manufacturer for consultation, please do not repair it.