What should I pay attention to when using the automatic cutting machine?

- Apr 01, 2019-

The cutting machine has played a lot of important positions in industrial production. Its types are suitable for adapting to different ranges of use, such as automatic cutting machines, hydraulic transmission cutting machines and so on. So what should we pay attention to when using the cutting machine?


1. When setting the cutter, you must first loosen the setting handwheel so that the setting lever touches the cutting point control switch, otherwise the cutting tool setting switch turns ON, the set action cannot be generated;


2. When working, the cutting knife should be placed in the center position of the upper pressing plate as much as possible to avoid the unilateral wear of the machine and affect its life.


3. Replace the new cutting knife. If the height is not the same, please reset it according to the setting method.


4. When cutting the movement, please leave the cutter or the seesaw. It is strictly forbidden to use the hand to help the cutter to cut it, so as to avoid danger.


5. If the operator needs to leave the position temporarily, please turn off the motor switch to avoid damage to the machine by improper operation.


6. Please avoid overloading to avoid damage to the machine and reduce the service life. For the safety of personnel and the normal use of mechanical equipment in the future, such precautions must be understood and familiar.



23