Safety Precautions of swing arm clicker press

- Mar 22, 2019-

1. In order to ensure safety, it is strictly forbidden to extend the hand and other parts of the body into the punching area during operation. The power must be turned off before maintenance and the wooden block or other hard objects should be placed in the blanking area to prevent the pressure plate after the pressure is released. Loss of control, causing accidental personal injury.


2. Under special circumstances, when the upper pressure plate needs to rise immediately, press the reset button. When stopping, press the power brake button (red button), and the whole system will stop working immediately.


3. When operating, you must hit both buttons on the pressure plate with both hands, and do not change one hand or pedal operation at will.


Maintenance: Always keep the inside of the machine clean, the oil filter net is cleaned once a month, the hydraulic oil is changed once a year, the oil level in the machine should be checked before work. When it is lower than the specified liquid level, it should be supplemented with the same grade in the machine. Hydraulic oil should not be mixed. When cutting materials, the workpiece should be placed in the center of the work area to make the machine evenly distributed throughout the machine, and extend the life of the machine from the surface.