1. Fix the cutting machine horizontally on a flat concrete floor, check whether all parts of the cutting machine are intact and firm, and whether the line is smooth and effective.
2. Remove dirt and debris on the upper platen and work surface.
3. Inject 46 # anti-wear hydraulic oil into the fuel tank, and the oil level should not be less than 25mm above the filter screen.
4. Connect the 380V three-phase power supply, press the start button of the oil pump, and adjust and keep the motor rotation consistent with the direction of the arrow.
This machine is suitable for continuous blanking of non-metal coils with the same specifications in large quantities with forming die. For example: it can be used in the industries of insoles, shoes, football, volleyball, tennis, medicine and so on.