Cutting Machine Operating Procedures

- May 24, 2019-

Cutting machine operating procedures:

a, non-designated personnel, it is strictly prohibited to tamper with the cutting machine.

b. Before starting, see if there are any off-line, bare wire or pulleys.

c. Close the power supply to see if the operation is normal, and if the sound is normal, check for leaks.

d, press the button to adjust the height of the upper plate, test the die, just cut it.

e. Depending on the material, it is determined that the opened thickness does not exceed half of the die, ie 5/8”.

f. Do not put your hand under the upper plate to operate.