How To Change Oil Of Cutting Machine

- Dec 08, 2020-

What steps do you need to take to change oil of cutting machine?

1. clean the oil tank

The cleanliness of the oil tank directly affects the cleanliness of the hydraulic oil, then put off the dirty oil at the same time, must be a comprehensive cleaning of the oil tank, you can dip the cloth in diesel oil wipe (do not use gasoline, rosin water, etc.), dry add new oil.

2. clean the filter

The filter should also be cleaned at the same time when changing oil. (Recommended: filter should be cleaned once every three months) can be treated with motorcycle carburetor cleaning agent.

3. Adjust the amount of lubricating oil

The amount of lubricating oil is adjusted on the return circuit of the oil circuit integrated block. After adding new oil, start the machine and see the amount of lubricating oil. If you need to adjust, please adjust it to the appropriate size.

4. Tighten loose parts

Before adding new oil, tighten the hydraulic screws and pipe joint nuts to prevent the hydraulic parts from loosening and affecting the pressure of the cutting machine.