How To Slove The Oil Leakage Problem Of Hydraulic Die Cutting Machine

- Jan 10, 2020-

Cause two: quality problems of cutting machine seals

1. The storage period is too long, and the seals naturally age and fail.

2. Poor storage, deformation or damage



Cause three: The viscosity of the oil in the cutting machine is too low

1. Wrong oil used when changing hydraulic oil

2. Other brands of oil are seeped in the oil, it is recommended to replace the appropriate oil



Cause four: Cutting oil temperature is too high

1. Hydraulic cylinder inlet has too much resistance

2. The ambient temperature is too high

3.The pump or cooler is faulty

Troubleshooting:

1. Check if the oil inlet is unblocked

2. Take insulation measures

3. Check the cause and eliminate