How to install the automatic cutting machine is correct?
1. It should be noted that the equipment should be placed on a flat concrete floor, and it is necessary to check whether all parts are complete, and whether all lines are unblocked.
2. Pay attention to the cleaning of the equipment to avoid debris on the work surface of the equipment.
3. When the hydraulic oil is injected, it must be done after the equipment is installed, and the oil level must be kept above the oil filter surface.
4. When the power is connected, the device can be started by pressing the button. The steering of the motor needs to be adjusted, and its steering must be the same as that of the arrow.