Notes For Operation Of Four-column Cutting Machine

- Jan 04, 2021-

1. When the precision four-column cutting machine is working, the cutting tool should be placed in the center of the upper pressing plate as far as possible, so as not to cause unilateral wear of the machine and affect its life.




2. If the height of the new cutting tool is different when replacing the precise four-column cutting machine, please reset it according to the setting method.




If the staff needs to leave the position temporarily, be sure to turn off the motor switch before leaving, so as to avoid damage to the machine caused by other people's improper operation.




Please avoid overloading to avoid damaging the machine and reducing its service life.




5. When setting the cutting tool, you must first release the setting handwheel so that the setting bar can contact the cutting point control switch; otherwise, when the setting switch of the cutting tool is switched to ON, it will not produce the set action.




6. When the precision four-column cutting machine is cutting, please keep your hands away from the cutting knife or cutting board. It is strictly prohibited to touch the die with your hands to avoid danger.