Notes When Using A Rocker Cutting Machine

- Aug 01, 2019-

The rocker cutting machine is a kind of cutting machine, which is very suitable for cutting small areas of non-metallic materials in industry. So, what problems should we pay attention to when using the rocker cutting machine? Next, Yancheng Huasen Machinery Co., Ltd. will introduce the problems that should be paid attention to when using the rocker cutting machine.


1. When setting the cutter of the rocker cutting machine, you can first relax the setting handwheel so that the setting lever should touch the control switch of the cutting point, otherwise the cutter setting switch of the rocker cutting machine will turn to ON. The set action cannot be generated.


2. When you work, the cutter of the rocker cutting machine should be placed in the center position of the upper pressure plate as much as possible to avoid the unilateral wear of the rocker cutting machine. The unilateral wear of the rocker cutting machine will affect the rocker cutting machine. The service life.


3. When replacing the cutter of the new rocker cutting machine, if the height is not the same, then the cutter of the rocker cutting machine should be reset according to the setting method.


4. When you use the rocker cutting machine to perform the cutting action, the hand must first leave the cutting knife or the jaw of the rocker cutting machine. It is strictly forbidden to use your hand to help the knife die to cut, otherwise it is very dangerous.


5. If the operator wants to temporarily leave the position of the rocker cutting machine, be sure to turn off the motor switch to prevent the improper operation of others and damage the machine. Also avoid overloading to avoid damage to the machine and reduce its service life.


2