Operation Precautions For Four-post Hydraulic Cutting Machine

- Nov 04, 2020-

1. When the precision four-post cutting machine is working, the cutting knife should be placed in the center of the upper pressure plate as much as possible, so as not to cause abrasion on the single side of the machine and affect its life.


2. When replacing the precision four-post cutting machine with a new cutter, if the height is different, please reset it according to the setting method.


3. If the operator needs to leave the position temporarily, be sure to turn off the motor switch before leaving to avoid damage to the machine due to improper operation by others.


4. Please avoid overloading to avoid damage to the machine and reduce the service life.


5. When setting the cutter, you must first release the setting handwheel so that the setting lever can touch the cutting point control switch, otherwise, when the cutter setting switch is turned ON, the set action cannot be generated .


6. When the precision four-post cutting machine is cutting, please keep your hands away from the cutting knife or chopping board. It is strictly forbidden to touch the knife mold with your hands to avoid danger.