Reasons Why The Cutting Machine Fails To Pass The Safety Supervision?

- Sep 21, 2020-

In the use of the cutting machine, when the two work buttons work together and have precise requirements for time, it is necessary to synchronize the two work buttons. The synchronization is based on specifying a common time reference between the two work buttons. That is, the simple description is that when the switch is synchronized when the cutting machine is in use, even if the user of Honggang presses one of the working buttons in advance and then presses the other working button, the cutting machine will not work, and the two working buttons must be pressed at the same time. Work only when they live, so it’s safer to operate.

What is the reason for the slow down speed of the cutting machine but the normal rise speed?

1. Check that the travel switch is jammed or the travel switch is broken;

2. Change the position of the relay and press it firmly;

3. The solenoid valve is malfunctioning, such as a stuck valve;

4. The pumping failure of the oil pump requires professional inspection;

Contactors are divided into AC contactors (voltage AC) and DC contactors (voltage DC), which are used in electricity, power distribution and electricity. In a broad sense, a contactor refers to an electrical appliance that uses a coil to flow current to generate a magnetic field and close the contact to control the load.