Safety Precautions Of Four-column Cutting Machine

- Feb 26, 2020-

In order to ensure safety, it is strictly prohibited to insert the hand and other parts of the body into the blanking area during operation. The power must be turned off before maintenance and wood or other hard objects should be inserted into the blanking area to prevent the upper pressing plate from losing control after pressure relief and causing accidental personal injury.


Under special circumstances, when the upper pressing plate is needed to rise up immediately, you can press the reset button; when it stops, press the power brake button (red button), and the whole machine system will stop working immediately.


when the operation must be two hands on the press plate on the two buttons, not to change at will, or foot operation.




What kind of solenoid valve does cutting machine manufacturer introduce?

Solenoid valve is used to control the cutting machine liquid automatic basic components. It belongs to the actuator, which is used to adjust the intermediate parameters such as direction, flow rate and speed of the industrial control cutting machine system. Solenoid valve can be coordinated with different circuits to achieve the ideal control effect, to ensure the accuracy and flexibility of the control tool. There are many kinds of solenoid valves. Different solenoid valves have different control functions on different positions of the cutting machine system.


Check valve;

1. Throttle valve;

2. Directional control valve;

3. The overflow valve;