Technical Safety Considerations Of Hydraulic Die Cutting Machine

- Sep 10, 2020-

(1) After the machine is installed, it is necessary to ensure complete safety protection devices, complete lines and pipelines. Properly ground the electrical idea.

(2) When the machine is repaired, adjusted, refueled, wiped, and inspected, the power supply must be blocked first to avoid danger.

(3) Before turning on the mind device, you must pay attention to the surrounding environment to see if there are people working under the machine.

(4) During homework, the self-priming pump is not allowed to place any irrelevant items such as oil cans and tools on the workbench.

(5) If an accident occurs after driving, or if there is abnormal noise or jamming, the vehicle must be checked immediately.

(6) It is strictly forbidden to reach into the cutting area while the machine is in operation. Even when the machine is parked, it is strictly forbidden to change tools and adjust the cutting area.

(7) It is necessary to check the brake department frequently. Under any circumstances, the upper plate of the cutting machine must not have re-cutting or spontaneous movement (slipping).