The Advantages And Basic Structure Of The Horizontal Cutting Machine​

- Jun 03, 2019-

The advantages and basic structure of the horizontal cutting machine


The horizontal cutting device guide device widely uses a single-station guide device. Its structure is similar to that of a vertical cutting machine.


In addition to the single-station guide, the double-station and three-station guides are also used in production because they have more than one stocking station, so the changeover time is short and the efficiency is high.


basic structure

The bedroom cutting machine is used to cut a large width of tape in a tire or hose.

It is mainly composed of a guiding device 1, a single ring distributor 2, a feeding device 3, a fixed length device 5, a cloth cutting device 4 and the like.

The advantages and basic structure of the horizontal cutting machine

The tape roll is placed on the guide device, and the cloth roll is rotated, and the tape is guided when the cloth is taken up.

The guided tape enters the feeding device through the single ring distributor.

The tape is fed by the feeding device, and the cloth is stopped after being fixed by the manual or photoelectric fixed length device. When the cloth cutting device is started, the cloth applicator will carry the cloth edge, and the knife car will carry the high speed rotating blade along the slide track to complete the cutting tape.

Then the cutter car stops cutting and returns to the original position.