The Method Of Automatic Cutting Machine To Distinguish Good From Bad!

- Oct 08, 2020-

1. You need to check the appearance, that is, the basic spray color. The appearance is not only the surface layer, but also the interior, the cylinder, the chassis, and the workbench. There is also the need to check the difference between the scheming machine and the old machine.


2. Listening to the sound can also distinguish between good and bad, so that you can determine whether it is a new machine. If it is a new device, there will be no noise. Only when the motor is exhausted, it will make abnormal noises, which proves that the equipment is faulty. .


3. There are generally no keys required to open the electrical control box. It can be opened at will, so you need to check whether the circuit in the box is normal.


4. The test machine needs to check whether the operation is flexible, check the production efficiency of the blister equipment, and check the product quality after punching.


How should we install the cutting machine normally? The editor below will talk about it for you;


1. It should be noted that the equipment should be placed on a flat concrete floor, and it is necessary to check whether all parts are complete and whether all lines are unblocked.


2. Pay attention to the cleaning of the equipment to avoid debris on the work surface of the equipment.


3. When the hydraulic oil is injected, it must be done after the equipment is installed, and the oil level needs to be kept above the oil filter surface.


4. When the power is connected, the device can be started by pressing the button. The steering of the motor needs to be adjusted, and its steering must be the same as that of the arrow.