When The Indicator Light Is On, The Motor Can Be Started But Not Working

- Oct 21, 2020-

When the indicator light is on, the motor can be started but not working


(1) Turn the die setting switch to the horizontal position to lock the oil circuit: Turn the die height setting switch to the straight direction


(2) Wrong rotation of the motor: Change the two-phase wire pairs of the motor


(3) Poor contact of the work switch and the end of the wire fall off: Check the line to connect the end of the wire


(4) The solenoid valve coil burned out: replace the coil or the entire solenoid valve


(5) Solenoid valve spool stuck: clean the spool


(6) The stroke adjustment handle is loose: reset the die